Security Mode – Select WPA2-PSK from the dropdown.It is recommended that legacy standards such as 802.11a/b/g be disabled to maximize performance if you no longer have or use devices that use these older standards. 802.11 Mode – Select the IEEE 802.11 wireless standard(s) you wish to use.5GHz broadcast uses more non-overlapping channels, use higher channel widths on 5GHz. Because of the limited number of non-overlapping channels on the 2.4GHz wireless spectrum, it is highly recommended that the width be set to 20MHz only for the 2.4GHz broadcast. Channel Width – Select the channel bonding width for the Wi-Fi band.The “Auto Channel Selection” option can be selected to allow the router to automatically choose the best channel to use based on its current environment, or, manually select the channel to use at all times. Channel Selection – This refers to the channel the radio will use to broadcast the signal.Hide SSID – This option should remain unchecked.Name (SSID) – Type in the name you wish to call the Wi-Fi network.Wireless LAN – Make sure the Enable radio is selected.Make the following changes to secure and customize your Wi-Fi signal: Depending on the EMG model there will be an option for Wireless LAN 2.4G and Wireless LAN 5G on dual-band models and Wireless LAN on single-band models. Default ZyXEL credentials are admin/1234, this information may be different if device is running custom ISP (Internet Service Provider) settings.įrom the status page click on the Configuration menu icon on the far left.Ĭlick on Network and select the wireless radio you wish to configure. Enter the administrator credentials when prompted and login. Please be aware that wireless performance will depend on environmental variables and hardware capability.Īccess your router's web configuration screen by opening a web browser (Internet Explorer, Firefox, etc.) and enter your routers configuration address on the address bar ( ). Recommendations to acquire the best possible performance will also be given in the tweaks section.
This walkthrough will guide you through the process of setting up a wireless network name (SSID) and strong wireless security profile (WPA2). This guide is designed to help with the first time Wi-Fi setup on EMG supported devices.
0 kommentar(er)
